CCTV camera PCB |
![]()
|
CSecurity camera PCB Module |
![]() click on image for large view
![]() |
|
|
|
Video System: PAL fully compatible
with Australian TV System.
Image Device:
752 (H) x 582 (V) 437 664 Pixel
LOW BLEMISH 1/3"
SONY CCD Image Sensor & SONY DSP Chipset.
Lens: Board Type 3.6 mm
Focal Length, accessory Lenses: 2.1, 2.9,
5.7, 8, 12, 16 & 25 mm (BL)
Security Camera module PCB Lenses,
corners of image may be slightly
cropped with 2.1 mm Lens,
CCTV camera module lens.
Scanning System: 2 : 1 Interlace, PAL
50 Hz vertical, 15 625 Hz horizontal.
Synchronisation: Internal.
Video Output: 1.14 V p-p Composite
Video 75 ohms, suit Australian TV, VCR, AV & Video inputs, BNC socket, ~ 20 cm
cable.
Horizontal Pixels: 700 + (this value
is provided for comparative purposes only) Better than Super-VHS resolution.
Sensitivity: ~ 0.5 lux @ F1.2 (this
value is provided for comparative purposes only).
Automatic Electronic Shutter (AES):
1/50 to 1/100 000 second, 20 milliseconds to 10 microseconds,
PCB Camera shutter.
Signal to Noise ratio: ~ 48 dB,
measured with AGC Off.
Automatic Gain Control (AGC): Yes.
Back Light Compensation (BLC): Yes.
White Balance: Automatic Tracking.
Power Requirements: 12 Volts DC
Regulated, ~ 130 milliamps, 2.1 x 5.5 mm DC socket, center pin = (+),
~ 20 cm cable.
Dimensions: ~ 44 Wide, ~ 37 mm High, ~
30 mm Deep with 3.6 mm Lens, ~ 15 grams.
Mounting Hardware
Screw/Nut/Spacer/Bush Paks
Made in Taiwan in an ISO 9001
certified factory.
Manufacturer's Experience: 18 + Years.

Need Sound
bug microphone
Ancillary Products
Power-Up-Cable |
|||